Cable Datasheets

Explore:

Explore our technical download documents that you may find useful (select):

Accessories & Tools Datasheets

Bending Levers
To assist in the symmetry of multiple bends on large installation or where the heaviest cables are involved

Cable Glands
ATEX approved Brass gland for use in both hazardous and standard working environments

Clips and Saddles - Bare
SINGLE CLIPS & TWO WAY SADDLES (BARE COPPER)

Clips and Saddles - LSZH Coated
SINGLE CLIPS & TWO WAY SADDLES (LSZH COATED)

Glass Braided Sleeving
High quality braided glass fibre construction with a silicone rubber coating

Headed Sleeving
Headed sleeving sizes for the Increased Safety Seals

LSZH Shroud
RHGMM LSZH shrouds are a low smoke zero halogen shroud which are used during installation to cover the cable glands giving a neat professional finish.

Pre Punched Copper Strip
Designed for securing multiple runs of M.I Cable, but can solve many other securing and fixing problems

PTFE Sleeving
PTFE sleeving

PVC Shroud
The PVC shroud is a low cost method of concealing and protecting the termination assembly

PVC Sleeving
Sleeving used in the protection & identification of conductors.

Ringing Tool
The ringing tool is used to score a light groove in to the surface of the copper sheath to neatly stop the stripping action

RLM Lock Nuts
Brass lock nuts for use with RGM glands

RLWS Serrated Washers
Serrated washers for use with RGM glands

Rotary Stripper
The Rotary stripper is suitable for all Wrexham Mineral Cable sizes. This is used to strip the copper sheath to assist in terminating the cable

RPS Seals
RPS seals (commonly know as standard seals) are designed to be used in conjunction with Wrexham Mineral Cables glands

RPSL Seals
RPSL seals (commonly know as Earth Tail seals) are designed to be used in conjunction with Wrexham Mineral Cables glands

RQK Lugs
RQK Lugs and Connectors

Solid Copper Strip
Designed for securing multiple runs of M.I Cable, but can solve many other securing and fixing problems

Straight Through Joint
Where it is not possible to joint two MI cable lengths in through type boxes of a suitable size and shape by fitting seals and glands or it is necessary for the joint to be water tight, the straight through cable joint offers a space saving alternative

ZDC20 Crimper
A robust long life tool that applies a three point crimping action to the brass pot seal to secure locking the cap in to position

ZDD Crimper
Uses a 3 point crimping plate to lock the stub cap in to the pot

ZPM Pot Wrench
The pot Wrench is a tool to assist in the screwing on of the brass pot

ZRP Pot Wrench
Wrench Quick and easy ratchet tool for screwing on 20mm pots to the cable

ZSJ Stripper
Easy to set tool for fast and efficient stripping of: 2L1, 2L1.5, 2L2.5, 3L1, 3L1.5, 4L1, 4L1.5